Bubble Bag Kit (8 Bags) 4.5L

Mesh Bubble Bag Kit (8 Bags)

These bubble bags are designed to extract natural resin from your plants without the use of chemicals. All kits come with a pressing screen which helps with the production of your herbal extract. The carry bag allows for easy storage and transport. Each bag has a different micron which splits up the herbal into different grades to fit your needs.

How to Use Manually:

1. Line a 1, 5 or 20 gallon bucket (depending on mesh bag size) with the Bubble Bags, starting with the 25 micron bag and ending with the 220 micron bag.
2. Fill the bucket with enough cold water to cover the bottom of the Bubble Bags (about halfway full).
3. Add the dry or frozen plant trimmings.
4. Add enough ice to almost fill the bucket to the top.
5. Stir the mix for 15 to 20 minutes, adding ice if necessary to keep the water cold. A 50/50 mix of ice and water is ideal.
6. Begin collection of the herbal extract. Pull out the 220 micron bag and allow the water to drain into the remaining bags. Dicard the contents of this bag as the 220 micron bag is used only to catch contaminants.
7. The remaining bags contain various grades of extract. Pull out each Bubble Bag, one by one, draining them back into the bucket.
8. As each bag is pulled out, turn it inside out and stretch it over a bowl. Scrape the herbal extract off with a spoon or plastic card.
9. Place the extract onto a blotting screen. Fold a clean, dry, dish towel in half with the blotting screen in the middle. Gently plress out the moisture.
10. Enjoy the new herbal extract!

How to Use Mixing With Bubble Now Machine:

1. Line a 1, 5 or 20 gallon bucket (depending on mesh bag size) with the Bubble Bags, starting with the 25 micron bag and ending with the 220 micron bag.
2. Place plant material in the Bubble Now bag. Add enough ice to fill the bag, then place the bag into the Bubble Now machine.
3. Fill the Bubble Now machine with very cold water and ice, up to the line marked “H” inside the unit.
4. Turn on the Bubble Now machine. You can adjust the time to a desired setting. It is recommended 5 to 15 minutes maximum.
5. When the Bubble Now has finished mixing, there is no need for settling to occur. Using the drain hose, drain the water into the Bubble Bags, prepared in Step 1.
6. Gently squeeze any remaining water out of the Bubble Now Bag. Rinse down the inside of the bag to make sure no plant extracts are stuck to the inside. Drain the rinse water into the Bubble Bags.
7. Begin collection of the herbal extract. Pull out the 220 micron bag and allow the water to drain into the remaining bags. Dicard the contents of this bag as the 220 micron bag is used only to catch contaminants.
8. The remaining bags contain various grades of extract. Pull out each Bubble Bag, one by one, draining them back into the bucket.
9. As each bag is pulled out, turn it inside out and stretch it over a bowl. Scrape the herbal extract off with a spoon or plastic card.
10. Place the extract onto a blotting screen. Fold a clean, dry, dish towel in half with the blotting screen in the middle. Gently plress out the moisture.
11. Enjoy the new herbal extract!

Kit includes:

• 1pc Bag Purple: 25 micron
• 1pc Bag Yellow: 73 micron
• 1pc Bag Orange: 120 micron
• 1pc Bag Red: 160 micron
• 1pc Bag Blue: 220 micron
• 1pc White: 43 micron
• 1pc Black: 90 micron
• 1pc Green: 190 micron
• 8″ x 8″ Pressing screen
• Carry bag